ответ от сервис-суппорта поставщиков:
The Highland Argon regulator using the same internal design and parts as the Highland Compact DIN first stage. It is possible to use this regulator for breathing gas and do oxy cleaning as you asked.
Please understand that the Argon first stage has only one shim inside and the IP is factory set to be between 115-125 psi. The Compact DIN first stage has an IP factory set for 135-145 psi. As such, you should have a dealer increase the IP in the Argon first stage if you are going to use it for diving.
We do not suggest or promote the Argon first stage for breathing gas. It was not designed to be used for that. If you like the design and size of this product, we do suggest you consider the Compact DIN first stage instead.
Some additional info is attached.
Take care and dive well.
XS Scuba Customer Service
info@xsscuba.comкратко если перевести: не рекомендуем из-за низкого установочного давления предусмотренного заводскими настройками, что может вызвать затруднения при дыхании, если очень нужно то можно изменить установки (с помощью дилера), а проще купить компактный регулятор (с таким же количеством портов), но изначально определенным для дыхания и по исполнению, и по установленному давлению...
выслали рекламку на то, что предлагают (ниже)